new ELV Steering Wheel Lock Actuator Motor for Audi Audi C6 A6/S6 Q7 J518 Start Module 410002013B, 410002011H, 32062

· The module is a part of vehicle's steering column. Module failure is a common issue in Audi 2005-2011 A6/S6 and 2007-2015 Q7 model vehicles.

· The issue is typically identified by no start and no response from key in the ignition, or proximity access (Start button). The Start / Stop Authorization Module (along with the Electronic Ignition Switch) is responsible for key/transponder recognition, unlocking/locking of steering wheel and powering up all modules in the vehicle. If there is an issue with any of the lock module components (actuator motor, sensing micro switches, relay) or the integrated Immobilizer system Microprocessor/PCB, the module will not provide power to Terminal 15 (ignition on). End result, no ignition and no engine start. The module will typically store "00288 - Steering Column Lock Actuator (N360) - Defective" fault.

FEATURE:

· Noiseless, power enough solid, durable and superior quality.

· Once installed, it is ready for use.

· New Parts, high quality.

Compatible with the following:

FOR 2005-2011 Audi C6 A6/S6

FOR 2007-2015 Audi Q7

Reference numbers from old parts: 
410002013B, 410002011H, 32062

Feature:

-Push-in style te rminals

-Can be operated in either direction, simply reverse power supply polarity

SPECIFICATIONS:

Mounting: These fit into a clam-shell. No threaded mounting holes! 

No load speed: 12000-16000RPM

Operating voltage: 12V DC

notice:

Pls check with your car original lock motor before order to make sure it is the same as the one we list in our store.