Good to know:

The new Mini ACDP module 21 comes with the same hardware configuration as module 13. The difference is module 13 adds a DL501 (0B5) interface board, and they support different functions.

If you have module 13 for the VW Audi gearbox clone, just pay for a software license to add the gearbox mileage correction function. Don't need to buy interface boards again.
If you do not purchase module 13, and only want to change the mileage of the VAG gearbox and do not want to clone the gearbox for VAG, just purchase Module 21.

How to use the module to work with Mini ACDP?
1. ACDP module 13 VW Audi Gearbox Clone
Connection diagram:
VW AUDI DL382 (0CK)

VW AUDI DQ250 (02E/0D9)

VW AUDI VL381 (0AW)

VW AUDI DL501 (0B5)

Operation guide:
Select VW>> Gearbox Clone>> VW, Audi, Seat, Skoda>> the corresponding gearbox model>> Full Backup>> Full Write

2. ACDP module 21 VW Audi gearbox mileage correction
The connection diagram is the same as module 13.
Operation guide:
◇Select VW>> Gearbox mileage correction>> VW, Audi, Seat, Skoda >> the corresponding gearbox module supported>> Identify>> Mileage correction (auto mode) or Mileage correction (single step mode)

Note: Mileage correction (auto mode) is recommended to use. It supports EEPROM reading, mileage adjustment and EEPROM writing by Mini ACDP.
Mileage correction (single step mode) is recommended only in the following situations.
◇Read EEPROM by other devices, and write EEPROM by ACDP
◇Read EEPROM by ACDP, and don’t want to write EEPROM data

3.ACDP module 19 VW/Audi DQ380/DQ381 0DE gearbox clone
Connection diagram:

Operation guide:
◇VW>> Gearbox Clone>> VW/Audi/Skoda>> DQ380 (0DE) or DQ381 (0DE)>> Identify>> Full Backup Data>> Full Write Data
◇VW>> Gearbox Clone>> Seat>> DQ381 (0DE)>> Identify-> Full Backup Data-> Full Write Data