Product Code:
12001 Weight:0.624KgCategories: Key Programmer
Manufacturer | Tango |
Weight | 0.624 Kg |
Original Tango Key Programmer Full Package with All Software Activated
Original Tango programmer is a new generation of transponder programmer which is developed to cover, read, write and generate the latest transponders used in the latest vehicle immobilizer technologies.
1, After buy it, you will need to connect to the official website and update within 28 days, or it will get locked
actually, i will update it for you before we ship it out.
The device has an ergonomic design with high mechanical characteristics of IP65 class conforming to the DIN EN 60529 standard
1.Enclosure is made of 3mm ABS-plastics with a rubber shock-proof damping seal which simultaneously is a decor element
2.Power is derived from the USB cable, so does not require an external power source
3.The TANGO uses a specifc type of driver, which avoids conflicts with other devices working through virtual ports
4.The hardware design accommodates keys and transponders of all sizes
5.Dimensions: length 160mm; width 80mm; height 50-30mm
V1.108.1 Tango Software Newly Added (Free Online Update):
[+] True Image Generator for Toyota H keys (Page1 39, 59,5A, 99)
on TRPWS21 Transponder*
[+] TIRIS AES verifying of a crypto key
[+] Added transponder TIRIS RF430
[+] Added transponder CN3
[+] Added manual editing CN1..CN and some other emulators.
See Transponder type > Emulators...
[+] Key maker BMW bikes C600, Husquarna 900R (95160, DST8O)*
[+] Key maker BMW bikes C650, R1200 (9S12G128, DST80)*
[+] Key maker Brilliance M2 (93C66, ID48)
[+] Key maker Great Wall Haval, Hover H3/H5 (93C66, ID48)
[+] Key maker Land Rover Freelander 2003 (PIC18F252, HITAG) *
[+] Key maker Volvo S60 2010- (NEC, HITAG) *
[.] Toyota Tango Plus: fixed bug on A9-type smart systems.
[.] Improoved MEGAMOS48 operations
V1.108 Tango Software Newly Added (Free Online Update):
[+] Cloning Toyota SmartKey 128BIT (Page1 88) to SLK-03*
[+] Cloning Toyota SmartKey 128BIT (Page1 A8) to SLK-03*
[+] Cloning Toyota SmartKey 128BIT (Page1 A9) to SLK-04*
[+] TangoPlus for Toyota V6.3
True Emulation via OBD of all SmartKeys page1 88.
The only right conception to solve the “All Keys Lost”problem.
[+] TangoPlus for Toyota V6.3
True Emulation via OBD of all SmartKeys page1 A8.
The only right conception to solve the “All Keys Lost”problem.
[+] TangoPlus for Toyota V6.3
True Emulation via OBD of all SmartKeys page1 A9.
The only right conception to solve the “All Keys Lost”problem.
[+] TangoPlus for Toyota V6.3
True Emulation via OBD of all SmartKeys page1 98.
The only right conception to solve the “All Keys Lost”problem.
[+] Image generator Toyota Page1 88 on SLK-03. The generated
transponder is fully compatible to Toyota requrements that A Customer is able to learn it via OBD
[+] Image generator Toyota Page1 A8 on SLK-03. The generated transponder is fully compatible to Toyota requrements that A Customer
is able to learn it via OBD
[+] Image generator Toyota Page1 A9 on SLK-04. The generated transponder is fully compatible to Toyota requrements that A Customer
is able to learn it via OBD
[+] SLK-04 Transponder launched!Supports Toyota’s SmartKey DST AES
(Page1 A9) emulation. This feature allows to start an engine,to learn new keys.
[+] SLK-03 Transponder launched!Supports Toyota’s SmartKey DST AES
(Page1 88 and A8) emulation. This feature allows to start an engine,to learn new keys.
[+] SLK-02 Transponder launched!Supports Toyota’s SmartKey DST AES
(Page1 98) emulation. This feature allows to start an engine,to
learn new keys.
[+] SLK-01 Transponder launched!Supports Toyota’s SmartKey DST AES
(Page1 94,D4) emulation. This feature allows to start an engine,to learn new keys.
[+] TangoPlus for Toyota V6.3
True Emulation via OBD of all SmartKeys Page1 94.
The only right conception to solve the “All Keys Lost”problem.
[+] TangoPlus for Toyota V6.3
True Emulation via OBD of all SmartKeys Page1 D4.
The only right conception to solve the “All Keys Lost”problem.
[+] Reset Toyota SmartKey(A9)*
[+] Reset Toyota SmartKey(39)*
[+] Key maker Mercedes Sprinter Classic (9S12,HITAG)*
[!] Improved Toyota Certification maker:
-Write DST AES (Page1 88 and A8) to emulator SLK-03
[.] Tango plus for Toyota: the V6.3connects to vehicles with a PassThru adapter. The software supports K-line and CAN communication.The
software supports 40-,80-,128-bit immobilizers and Smartkey ECUs.
[.] Some bugs fixed
Philips Transponders:
PCF7930-31 writing, reading
PCF7935 writing, reading, shadow memory, crypto calculator
PCF7936 writing, reading, modes password, crypto, Manchester & Biphase encodings
PCF7941 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7942 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7943 transponder, remote, Manchester & Biphase encodings
PCF7944 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7945 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7946 transponder, remote, Manchester & Biphase encodings
PCF7947 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7952 transponder, remote, eeprom, Manchester & Biphase encodings
PCF7961 transponder, remote, Manchester & Biphase encodings
Auto switching between PCF7936-PCF7961 windows if invalid type detected.
Autodetect manchester / biphase
Temic Transponders:
Temic 11 reading , writing to T5
Temic 12 reading , writing to T5
Megamos Transponders:
Megamos (13) reading , writing to T5 , emulating on PCF7930-35
Megamos (48) reading, writing, PIN, unlock by PIN, full range of memory contents, crypto calculation
Megamos CRYPTO-2 (8E) read ID, read/write EEPROM, write Cryptokey
Texas Transponders:
Tiris (4C) reading
Tiris (4D) DST crypto reading, writing, crypto calculator
Tiris (4E) DST crypto reading, writing, crypto calculator
Tiris (8C) reading
Atmel:
TK5551M (T5 replacement)
SAAB reading , writing to T5
The product is in working out stages, therefore the list of the supported transponders will be developed later.
Key Maker Usage.
Key maker usage consists of a four steps.
The 4-th step is additional and depends on a vehicle model.
1. Open an immobilizer dump file.
2. Choose number of the key you want create.
3. Place a transponder into the coil and click the WRITE button.
4. In some cases the program asks you to save a modified immobilizer dump. This dump must to be written into the immobilizer.
First of all, take a look at this picture. The "Loaded File" window displays the immobilizer file name. Ensure that a valid dump is stored. The "Maker" window displays selected maker name. Ensure the right key maker selected.
The "info" windows display an important information:
1. Original transponder---Informs you about type of the original transponder
2. Allowed transponder---Informs you what type of transponders is suitable for the key maker
3. Data location---The immobilizer memory may be stored in various chips, the description informs you about from where you have to read a dump. Some immobilizers can have various chipsets. In this case the field displays several possible chips. Find one of them inside of the immobilizer and read it.
4. Data size---Each chip has certain memory size, the key maker accepts files with the described size.
5. Data format---This field appears in case of 93CXX eeprom seria.
There are two standards of data layout:
Intel format and Motorola format or Little Endian and Big Endian respectively.
The data layout depends on a chip-programmer that is used for eeprom reading.This field informs you what kind of format is suitable for the key maker.Usually you can see that both formats are suitable. It means that the program can understand any data layout.
Firstly, run the key maker interface according to the vehicle and read information in the "Info" window. Watch theData location field describes the memory chip. Find out the chip inside of the immobilizer and read it. Save the read data (dump).
Click the "OPEN IMMOBILIZER FILE" button and load the saved dump.
The program will analyse the dump.
If the dump is correct the "WRITE" button will become active and the "Keys" window will display the range of key numbers that can be created.
Take a look at the "Info" window, the Allowed transponder field.
Ensure you use a transponder exactly the indicated type.
Place the transponder into the coil.
Choose the key position you want create in the "Keys" window.
Click the "WRITE" button.
This starts the writing process and transponder will be stored with the appropriate data.
At this point you may be asked to save a new immobilizer dump.
The program displays a standard File Save dialog where you have to save the data.
After this you will be informed about the new data saved and must be written into the immobiliser.
Write the new dump into the immobilizer. Now it is ready to operate with the created transponder.If you are not asked to save a new file, it means that immobilizer is ready to operate with the created transponder without file replacing.
Finish
1. ABS plastic enclosure: ingress protection IP65/DIN EN 60529
2. Rubber seal: prevents sliding on a workbench shock-proof function
3. USB connection: no external power
4. Big hole: adopted to large keys
5. Three small holes: adopted to various sizes of transponders
Q: Hardware not found after install the software and driver, how to solve it?
A: You need to install the software v1.83 first, then v1.84, next v1.85(install the software from older to newer)
Q: Tango key programmer support update for free or not?
A: Update free You need to connect the official website to update once within 28 days, otherwise the machine will be blocked. If you need special function or work it on special car model, you need to pay for it, you can check specific cost online
Q: I reprogram a BMW key, if I can delete the reprogrammed key with Tango?
A: No, it do not support this function
Q: Is there tokens limitation for Tango? Is there any extra cost, such as update cost?
A: There is no tokens limitation for Tango. Software update online for free. But if you need special function, or want to work it on special car model, you need to pay money to open the authorization
Q: Do you have Tango user manual?
A: You can check Tango user manual in the menu after software installation
LONGHUA DISTRICT SHENZHEN CHINA(PC.518109)
It is recommended that visitors in the United States and Canada visit the site deployed in North America, do you jump?