Ford Ranger 2019+ Steering Lock Emulator Specs:

Condition: New
Compatible Part Number: JB3C-3F880-AD

Ford Ranger 2019+ Steering Lock Emulator Overview:

Device Emulates Ford ESCL Unit, compatible with Ford Ranger 2019+

Ford Emulator is Plug & Play , No Programming Required.

• ELV Is A Self-occurring Mechanical Failure In The Steering Column Lock.
• The Occurrence Of The Fault Does Not Depend On Any Fault.
• In Case Of Malfunction, Even If There Is No Problem In The Vehicle Key, The Working Key Will Not Start The Vehicle Because The ELV Steering Column Lock Will Not Be Activated.
• In This Case, A New ELV Steering Column Lock Must Be Installed In The Vehicle And Programmed Into The Vehicle.

Steering lock problem is one of the most frequent Problems in many cars including the Ford Ranger 2019+Starting System. and when the steering lock is faulty, the car will start even if the customer has a 100% working key for it until you order a new steering lock for it from FORD agencies. BUT instead of spending hundreds of dollar for order a new OEM steering lock, we offer you this economic solution; the Ford Mondeo Emulator which needs NO PROGRAMMING, just plug and start!

This emulator replaces the faulty Ford ESCL Units, it is compatible Ford Ranger 2019+ Cars with Original SCL Number JB3C-3F880-AD

Ford Ranger 2019+ Steering Lock Emulator Installtion on Car :

1. Turn off the ignition.
2. Plug the ESL connector into the our emulator.
3. The SCL works only when it receives open and close signal.
4. Push the start button and the green led lights. If the red led blinks, there is an error that has to be erased by any diagnostic tool.

Ford Ranger 2019+ Steering Lock Emulator Wiring Diagram :

Ford Ranger 2019+ Steering Lock Emulator Fitments:

• Ford Ranger 2019+
• Ford Figo 2019