LAUNCH X431 IMMO PLUS key programmer is a new generation of 8-inch automobile special IMMO matching tool with high configuration and super performance. The host is developed based on the Android 10.0 open system, adopts a 2.0Ghz 4-core high-efficiency processor, 4GBRAM+64GBROM large storage, and is equipped with a high-endurance battery, which make the diagnosis faster, more stable and more durable. 

Strong core, large memory, super battery life
It integrates professional IMMO matching, IMMO programming, full-model system-wide diagnosis of plus functions and special functions. One machine with multiple functions and high performance cost ratio.
 
All-round IMMO matching, fast and accurate reading of IMMO data
Covering the IMMO matching function of many models in Asia, Europe, and America, more brands continue to be launched, up to 60+ brands
 
Support the full-model system-wide diagnosis of plus functions (read version information, read DTCs, clear DTCs, read data streams) for global 110+ brands

Support 39 special functions such as service lamp reset, throttle matching, steering angle reset, brake pad reset, tire pressure reset
 
Support the VIN intelligent identification function to quickly enter diagnosis
 
Fast and accurate diagnosis
 
Supports key matching/copying, IMMO IC reading & writing, and ECU reading & writing, etc.
 
IMMO modules replacement: Support IMMO modules replacement of BMW, Mercedes-Benz, VW/Audi, Honda, Nissan, Hyundai, Kia, BYD, Changan, Wuling Baojun, GAC, SAIC Maxus, Great Wall Motor, Chery Car, Dongfeng Fengxing, JAC Passenger Car, etc
IMMO password reading: Supports the IMMO password reading of Peugeot Citroen, GM, Nissan, Hyundai, Kia, Chery Cars, Dongfeng Fengxing, JAC Passenger Cars, etc.
 
Key Matching:Support key matching of Ford, GM, Mercedes-Benz, BMW, VW/Audi, Porsche, Peugeot Citroen, Land Rover Jaguar, Honda, Toyota, Nissan, Hyundai, Kia, BYD, Changan Automobile, Wuling Baojun, Great Wall Motors, Chery Cars, JAC Passenger Cars, etc.





 
Product Advantages:
 
1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.
3. Supports ECU replacement for fifth-generation Audi (0AW/0B5) gearboxs.
4. Supports reading, writing & cloning of the ECU for fourth-generation VW UDS engines.
5. Supports BMW E chassis 8HP gearbox ECU program wiping.
6. Support Mercedes(Engine, Gearbox, EIS) and BMW(Gearbox) ECU IMMO data erase.
7. Supports 170+ Bosch, 10+ Siemens engine ECU and 18+ gearbox ECU BENCH mode clone.
 
- Bosch engine ECU: ME17，MED17，EDC17，MEVD17, etc.
 
- Siemens engine ECU: BMW(MSV90, MSD87, MSD85,MSD81, MSD80), Mercedes(SIM271DE2.0,SIM271KE2.0), VW/Audi(SIMOS8.6x,SIMOS8.5x,SIMOS8.4x), etc.
 
- Gearbox ECU: DQ200-MQB, DQ250XX, DL501 Gen1,VL381,VGS2- FCVT,VGS-FDCT,DQ400E,DL501 Gen2,DL382-7F,VGS2-FDCT,9G_Tronic,DQ380,DQ381, DQ500,AL551,AL450,AL552,AL951,8HPXX, etc.
 
Product Functions:

 

Three functions in One

IMMO: read password, match key, replace module, data wipe

Clone: Engine, Gearbox

Diagnosis for Full function of all car series: diagnosis, coding, IMMO, initialization

 

IMMO	IMMO password reading	√
	ignition key learning	√
	IMMO module replacement	√
	module erase	Mercedes-benz, BMW
CLONE	engine module clone	√
	Gearbox module clone	√
DIAGNOSTICS	system diagnosis	√
	special functions	√

 

X-431 IMMO PLUS Host Specifications:
 

1pc x VCI connector

1pc x Diagnostic cable 

1pc x Password envelope

1pc x Type-A to Type-C USB cable
1pc x X-PROG 3 immobilizer programmer kit
1pc x Non-16pin adaptor cable kit