Product Code:
19363 Weight:1.5KgCategories: Tuning Tool
Warranty | 2 years |
Weight | 1.5 Kg |
Notice:
External 12V power for programmer powering in OBD mode!!!
USB powering ONLY !!!
Descpiption:
For Toyota Flasher, a joint project by Autokey and P.C.M.flash, is a multipurpose programmer for Denso and Fujitsu Ten ECUs with NEC processors installed For TOYOTA/LEXUS/SCION vehicles with petrol and diesel engines through JTAG interface. OBD writing via CAN bus is supported. It is a unique solution in the chip tuning world. It covers almost all the models beginning from 2003-2004. It can read, flash, clear, verificate internal flash memory of microcontrollers if connected to the appropriate connector on the ECU circuit board.
Advantages:
·Its own hardware interface allows to avoid all compatibility and driver problems;
·Work through built-in 20 or 26 pin JTAG connector;
·Full access to the ECU memory at high speed of more than 100 KB/s;
·Saving files in the open format;
·Firmware checksum verification and recalculation.
·SUPPORT 2015 + OBD WRITE and SOME MODELS 2015 + OBD READ
·can READ and WRITE via internal 20 pin or 26 pin connector. connection diagram for all known
Supported ECUs:
For TOYOTA DENSO ENGINE CONTROL MODULE based on NEC 7F00XX series MCU:
76F0038
7F0038A
76F0039
76F0039A
76F0040
76F0040A
76F0070 BGA
76F0085 BGA
saving in normal mode without any master-slave.
master only.
auto CHECKSUM CORRECTION support
These processors were introduced at the beginning of CAN support and as a rule with coachwork change.
Package List:
1pc* ECU Flash main unit
1pc* 12V/3A power out
1pc* 16pin cable for ecu reading by OBD
1pc* cable for BDM function
1pc* adapter for Mitsubshi reading by boot
1pc* USB cable to connect the tool to the computer
1pc* adapter
1pcs* pins
1pc* suitcase
Software Display:
LONGHUA DISTRICT SHENZHEN CHINA(PC.518109)
It is recommended that visitors in the United States and Canada visit the site deployed in North America, do you jump?