CGDI Prog BMW MSV80 Auto key programmer + Diagnosis tool+ IMMO Security 3 in 1 come with BMW FEM/EDC Function

CGDI BMW don`t need to pay for the License in future now

1. High technical tool which mainly doing Auto diagnose, programming and security maintenance 3 in 1
2. Support Key Programming for BMW CAS1/CAS2/CAS3 ,and Support Key Matching and All key lost for CAS4 /CAS 4+ 3. Support BMW Key Programmer with OBD Functions
4. Come with BMW FEM/EDC Function

Free update software:
001: CAS 
002: CAS4  CAS4+
003: Engine EME

CGDI MSV80 BMW Car Key Programmer Support Module list:

1.BMW CAS1 /CAS2 /CAS3 /CAS3+ /key increasing matching, KEY all lost matching,CAS computer replace,CAS3+ /P4X above version can directly downgrade by OBD in 5 minus 100% safety.
2.BMW CAS4 /CAS4+ /Support key matching,support key all lost matching.
3.Support BMW key inspection,can check key what status in.
4.Support BMW engine computer DME replacement.
5.Support BMW MSV80/MSD80/MSD85/series OBD read ISN code (no need to split computer when matching key)
   Exciusively support in Domestic
6.Support BMW Key unlock.

CGDI MSV80 BMW Car Key Programmer CGDI Functions:

1.Update in real time, products updated in zero cycle time, support model added in real time.
2. BMW CAS3/CAS3+Data repair--support change replace and split CAS computer, BMW MSV80 /MSV80.0 /MSD80 /MSD80.0 /MSD85 /engine change computer, ISN code reading and writing.
3. Equipment security greatly enhanced, the hardware anti-crack, anti-software copy.

CGDI Prog BMW MSV80 Support Model list:

CGDI Prog BMW MSV80 Read MSV80 Specification: 
Method 1: can read directly ISN code in the car,pls be assure car voltage is 12V above,directly connect OBD to operate--time about 5 minus. 
Methods 2: can directly split engine computer (DME) to operate--connectline as follows:




MSV80/D80/D85/wiring in the experimental bench
 
CGDI Prog BMW MSV80 Software Update Guide:

Step 1. Receive message " There is a new version", click on "OK"
Step 2. Click on "Setting", then "Check for updates", waiting until the next dialog box appears.
Step 3. Checking local file.
Step 4. Detects a new file, click "Yes" to update.
Step 5. Downloading file.

CGDI Prog BMW MSV80 Firmware Update Gudie:

Step 1. Connect CGDI Pro device to the computer, open CGDI software.
Step 2. Click on "Setting" and then "Upgrade the firmware", waiting.
Step 3. Updating...
Step 4. CGDI programmer firmware update successfully, again click on "Upgrade the firmware".
Step 5. Get message reading " The version is already up to date without upgrading". Click on "OK".

Detail info about CGDI BMW MSV80 Software & Firmware Update pls visit Teah Support at the top section.

CGDI Prog BMW MSV80 Package Listing:
 
1 pcs of CGDI Prog BMW MSV80 Main unit
1 pcs of Adapter
1 pcs of USB line