Yanhua BMW FEM BDC Control Moduel Testing Platform

How to use BMW FEM /BDC testing platform

1:  Insert the adapters into the BMW FEM /BDC testing platform. 

2: Connect well the harness and turn the ignition switch to the OFF status, ensure the voltage is 12V.  

3: Put the FEM key into the sensing area, press the "Enter" button and the red LED  lights up. 

4: Press the "Enter" button, the screen displays FEM BDC TESTS:11.2V, the battery icon on the screen lights up, means it starts OK.
Again press the "NETER" button and ACC OK
Again press the "ENTER" button and OFF OK
Then FEM BDC LINK OK, if no link to FEM BDC, it displays: NO FIND FEM BDC HOST. 

Package Listing:
1 pcs BMW FEM /BDC Testing Platform
1 pcs Cable