Latest Technical details :
Note: VVDI MB BGA tool update goes well, the following workable models are for reference only.
Model support IR/OBD:
W164, W164 2009+
A166, W197,W212, W218, A246
A169, W209, W211
W172, W204, A207
W204, W207, W212 only by dumpNEW!—W204, W207 via infrared ALL KEYS LOST option
W209 only by dump
W906Keys version supported:
v03, v06, v08
v05, v07, v09
v59,v61What keys/remotes are supported?
705 Moto 1997-2000
suport all key lost?A
: Now support all key lost : w204, w207,W166, W246, W212, W212(old),some W216, W164 2009-Q:
I test read data with obd2 210 k line working and 204 car read with obd 2 ,but 211 not read with obd2 cable connect
pin 1 : ESL 1
pin 2 : GND
pin 3 : +12V (30)
pin 5 : CAN L (White)
pin 6 : CAN H (Green)
pin 7 : CAN L
pin 8 : CAN H
Can any one test?
A:Read eis via obd for W164, W169, W211, W209, require gateway connected
: I bought EIS W221 lock with a key from the lock from one machine. I have read the PSW. I will make a complete loss of W221 key in the future?
Describe step by step procedureA
: you have uesd/2nd-hand EIS with working key,you can do like this for W221 all key lost
1.read all key lost EIS data-> save EIS data
2.read used EIS data enter password,get erase password->renew used EIS.
3.load step1 EIS data to renewed EIS with password->write EIS data
4.load EIS data(with key password)->prepare key file
5.input new key to device IR reader->load key file->write
6.insert new key to EIS->EIS will learn the new key->key learn success
by the way,if your all key lost W221 is motorola EIS,not need to change EIS,remove eis get eeprom by programmer(VVDI PROG).
then load eeprom to VVDI MB TOOL prepare key file.Q
: I have a w204 All key lost and i program a new EIS with VVDI, the ignition doesn't come on or crank, but the steering can lock and unlock. can someone guide me what to do?A
: about W204 all key lost(change new EIS),refer to following steps,maybe helpful:
1.Read EIS data via obd,then Save EIS data
2.adapt ESL:Read ESL data->Get Erase Password->Renew ESL
3.Change new EIS, Load EIS data(step1)->write Key Password(enter manually and at random)->Write EIS data
4.Personalize W204 ESL
5.Load EIS data(with Key Password)->Prepare Key File
6.Input new Key to device IR reader->Load Key file->write
7.Insert new Key to EIS->EIS will learn the new key->key learn success
First time today it took much longer than 8 hours to Unlock NEC.
Now I cannot personalize this ESL back because it is just not calculating key password. I have working key but it keeps failing to Calculate password. I have done about 6 or 7 times already.
Is there some problem in this V2.1.7? Or is the server having issues?
All sorted out. All done by VVDI but it took so many times to calculate password. Had to do aqcuisition maybe 8 times or so. The NEC is also unlocked. Then wrote ESL and personalised and ll is working fine. Customer will take it over the weekend to fit as the car is more than 500km away.
If they can see why recently is the VVDI suffering with password calculation on W204.
solution :about 8 times online calculation,the point is data acquisition,each time if acquisition without valid data means need one more time again.
What other accessories do I need to work with VVDI MB?A:
- Tokens: needed when calculating a Key Password (Internet connection required)
- NEC Adapter: newer version of the NEC adapter that adds support for KeylessGo
- ELV (ESL) Adapter: optional adapter needed to unlock ELV and program keys to the W204 chassis
- ELV (ESL) Emulator: can replace a damaged ELV module
- Cables for MB: various cables needed when doing work away from the vehicle (not needed if you are with the vehicle)
- Gateway Adapter: needed when working on W164, W169, W209, or W211 chassis away from the vehicle (not needed if you are with the vehicle)
- VVDI Prog: optional module that adds EEPROM functionality
1. VVDI-MB TOOL device
2. IR adaptor
3. USB cable
4. NEC adaptor 1
5. NEC adaptor 2
6. NEC adaptor base PCB
7. K Line in OBD line
8. OBD lineFeedback from customer:
I try to collect list of OK and K.O. experiences with IR pass reading with VVDI BGA TOOL
W210: EIS/EZS A208.545.01.08 - MCU ??? -read PSW IR - not successful
W210: EIS/EZS A210.545.02.08 - MCU 1D69J - read PSW IR - not successful
W210: EIS/EZS A210.545.03.08 - MCU 1D69J - read PSW IR - not successful
W210: EIS/EZS A210.545.00.08 - MCU 0D69J - read PSW IR - not successful
W215: EIS/EZS A215.545.00.08 - MCU 0D69J - read PSW IR - not successful
W215: EIS/EZS A215.545.08.08 - MCU 1L85D - read PSW IR - not successful
W203: EIS/EZS A203.545.05.08 - MCU ??? - read PSW IR - OK
W203: EIS/EZS A203.545.05.08 - MCU 1J35D - read PSW - OK
W203: EIS/EZS A209.545.09.08 - MCU 1L85D - read PSW IR - not successful
W220: EIS/EZS A215.545.02.08 - MCU ??? - read PSW IR - OK
W220:EIS/EZS A215.545.00.08 - MCU 1D69J read PSW IR - not successfulW639: EIS/EZS A639.545.05.08 - MCU 2x 1L02Y - read PSW IR - not successful
W639: EIS/EZS A639.545.09.08 - MCU 0L01Y - read PSW IR/OBD - not successful
I Can guarantee it will not read ANY WITH HC05
1D69J/0D69J cannot be read by IR alone - A calculation with kline is possible.
read a w203 A203.545.05.08 with mask 1J35d password ok
W203 IES 203 545 05 08 read PSW IR OK
W 220 IES 215 545 02 08 read PSW IR – OK
Only support parts of HC05, HC08 motorola eis(K line),if cannot support will show error, need to remove eis get eeprom. we have tested W215 ok, but not
means all W215 can support.in fact only support parts of this type.
please refer to change W204 esl steps:
ESL:Clear TP, Renew ESL(need erase password)
EIS:Renew EIS(need password & erase password)
Write EIS data back,then Personalize W204ESL